Premier Products: Accessories

Premier stocks and offers accessories for your use in your SIPs framing installation. Accessories are custom produced so they work flawlessly with Premier SIP panels.

Premier SIPs Screws, nicknamed "Big SIPs Screws" were developed specifically for the attachment of Premier SIPs to beams, purlins and posts of wood, and light gauge metal.  They also feature:

• Corrosion-resistant powder coating
• Excellent pull-out resistance, withstanding over 980 pounds of force
• State-of-the-art tempering and coating technology

• Sizes from 5" to 16" in increments of 1"

Premier SIPs Mastic has been specifically formulated for the sealant applications required in the erection of Premier SIPs.  This formulation of mastic consists of polymers that are designed to remain flexible and provide a seal against water vapor transmission and air infiltration.  Premier SIPs Mastic has the following features:

• Sealant for all types of construction
• Permanent, non-brittle formula
• Gunable at low temperatures
• Withstands cold, freeze-thaw cycles
• Retains its flexibility with age
• Resistant to moisture, dampness & temperature fluctuation
• Impervious to water wash-out

Ridge Cap is a custom-ordered one-pound-density EPS foam shape that fills  the void at a typical ridge connection. It allows for an easier roof connection at the ridge by using the factory (or job-site) square panel edges. It is available in 8' long pieces and is custom made for each project. The foam is cut with a hot wire to the shape that is determined by various factors including, roof panel thickness, the pitch of each side of the roofs involved and, in some cases, the type of roofing material that is placed on the finished roof.  Please refer to the Accessories: Ridge Cap Detail (PBS-304) for more information.

A foam scoop is a heating element with a handle that you can use to remove foam from the edges of a panel.  Most panel projects are pre-fabricated, but there can be circumstances that will require you to modify a panel in which a foam scoop will be necessary. 

For example, you may want to make a window larger, and after enlarging the opening bigger the foam will need to be recessed so you can insert lumber around the window.  

Or you may have a project that you would like to fabricate on your own, in which case we will send you blank stock panels.  A foam scoop is then necessary to recess the panels for any lumber you may need to install.

Technical Bulletin #6. Premier SIPs Screws & fasteners

Technical Bulletin #11.  Screw fastener capacities in OSB

Technical Bulletin #12. Nail withdrawal capacities in OSB

Technical Bulletin #14. Premier SIPs mastic usage

Technical Bulletin #20. PBS splines

All Premier SIPs Technical Bulletins

View All Accessory Details